DBX ZC-1 Drive Rack Zone Controller musical instruments, electric guitar, acoustic guitar, amps, bass, electric bass, synths, workstations, digital pianos, portable keyboards, arrangers, groove stations, sound modules, midi, drums, percussion, acoustic drums, electric drums, orchesta percussion, drum sticks, dj gear, lighting 
DBX ZC-1 Drive Rack Zone Controller The
remote device shall provide computer programmable rotary potentiometer volume control
for the dbx DriveRack 260, 220i and ZonePro™ devices. The
remote device shall have DIP switches allowing identification with connection
to the processing device via CAT 5 cable on RJ-45
connectors. The device shall be a dbx ZC-1 remote controller.
The Zone Controllers offer extended utility to the DriveRack®and ZonePro
families. The nine Zone Controllers use analog DC voltage to
provide logic control ranging from zone source selection, volume and
muting, to program or scene selection and fire safety muting.
Wired with readily available and affordable CAT5 cable with universally
accepted rj-45 connectors at distances up to 1000 ft, the
ZC Zone Controllers offer simple yet elegant solutions to the
contractor. The ZC-1 provides programmable remote volume control for the
DriveRack 260, 220i and the ZonePro 640 and 641. The
ZC-2 offers programmable volume and mute control for the DriveRack
220i, 260 and the ZonePro 640 and 641. The ZC-3
can function as a program selector for the DriveRack 260
and 220i; in addition it can be used for as
a source selector, page steering control, or a scene selector
for the ZonePro products. The ZC-4 provides program change capability
from contact closures for the DriveRack 220i and 260; it
can also provide source selection, page steering, or scene selection
for the ZonePro 640 and 641. The ZC-6 is a
programmable volume control for the ZonePro 640 and 641. The
ZC-7 is a programmable push-to-talk page assignment controller for the
ZonePro devices. The ZC-8 provides both programmable source selection and
volume control to the ZonePro 640 and 641. The ZC-BOB
allows "home run" or parallel wiring to the DriveRack and
ZonePro devices. The ZC-FIRE is a dedicated fire safety interface
for the ZonePro products that allows selection of either system
mute or scene selection upon being triggered by either a
relay or control voltage from the fire safety system. Features:
Programmable Volume Control Program or Scene Selection Programable Contact
Closure Interface Up to 1000 ft. on CAT 5 Cable
Programmable Push-to-Talk Paging Programmable Source Selection
Price: $69.95 |
|
